BARTEC BENKE CFPP-4.2, Руководство по эксплуатации

Страница: 8 / 107

6 General
CFPP Process Analyzer CFPP-4.2 03/2016
1.1 About this Document
These operating instructions are intended for personnel with a basic technical knowledge
of instruments such as the one described here. If you have little or no experience working
with such instruments, we recommend that you get advice from experienced persons or
take part in a training course by BARTEC BENKE before using the instrument.
These operating instructions must always be kept with the analyzer and must be
accessible at any time. They are an integral part of the analyzer.
Should you sell the analyzer, you must pass on the operating instructions to the next
owner. If you receive supplements to the operating instructions from BARTEC BENKE, you
must add them to the original document.
In addition to these operating instructions, all documents apply which are listed in the
table of contents of the customer file. You must observe the instructions in these
documents, particularly the safety instructions in the operating instructions for analyzer
components.
These operating instructions do not state the duties of the operating company which are
stated in the applicable laws, regulations and technical standards (e.g. organizational
measures, explosion protection document, regular checks, etc.).
For translations of these operating instructions into other languages, the German version is
to be regarded as the original document.
1.2 Liability and Warranty
Read these operating instructions carefully before installation and startup of the
instrument and observe the safety precautions. BARTEC BENKE cannot accept liability for
injuries or damages caused by failure to observe the operating instructions and safety
precautions.
We have checked the information in this document carefully to ensure its completeness
and correctness. However, as alterations may occur due to technical improvements, we
cannot accept liability for complete consistency. These operating instructions do not
constitute any obligation or guarantee of performance on the part of BARTEC BENKE.