Barska WINBEST Elite Edition, Руководство пользователя

Страница: 9 / 16

9
TONES
If the detector is set to the ALL METAL target mode, it sounds a single tone
when it detects any type of metal. If you set the detector to the DISC or
NORTCH modes, the built in audio identification system sounds a unique audio
tone for each of three categories of metal. This makes it easier to identify the
metal being detected.
Tone Detects
Low Tone Foil, nails, bottle caps and/or nickels
Medium Tone Pull tabs, zinc and/or copper items
High Tone Brass and/or silver items
Notes:
•
When you set the detector to DISC or NOTCH mode, the detector
sounds a medium or high tone when it detects highly oxidized iron. An
arrow appears in medium or high tone area.
•
Depending on the quality, about 15 percent of gold rings cause the
detector to sound a medium tone.
OPERATION
TURNING ON THE DETECTOR
1. Slide the power switch to ON. The unit displays all symbols on the LCD
screen. The detector sounds low, medium, high tones respectively. After
about 2 seconds the detector enters stand-by state.
- At this time the LCD displays ALL METAL and SENS. The value of SENS
on the segment is 5. The range from MIN. to MAX. for DISC/NOTCH is
available.