Biometric Safe Warranty
1. BARSKA warrants the Biometric Safe against original defects
in material and/or workmanship under normal use for a period
of twelve (12) months from the date product is received
by purchaser.
2. This Warranty is limited to original purchaser and is
not transferable.
3. This Warranty applies only to products purchased in the
United States.
4. BARSKA will examine and test returned product and repair or
replace defective part(s) or units with new part(s) or a new
unit if necessary within the warranty period. Purchaser is
required to remit $60.00 to BARSKA for return shipping and
handling at time product is returned.
5. If repair is required after warranty period expiration,
purchaser will be charged for replacement parts and return
shipping.
6. Purchaser must contact BARSKA at 1.909.445.8168 to
request a Returned Merchandise Authorization (RMA)
number. The RMA number must appear on the outside of the
shipping package. Product must be packed carefully and
sturdily in its original packaging to prevent damage in transit
and returned freight pre-paid to:
BARSKA
Repair Department
1721 Wright Avenue
La Verne, CA 91750
What is NOT covered by this Warranty?
1. Damage caused by improper installation or maintenance.
2. Damage from misuse, abuse, accident (such as dropping),
fire, flood, or acts of nature.
3. Damage from service or repairs other than those performed
by BARSKA.
4. Labor, cost and shipping charges for the removal and
replacement of defective parts beyond the initial
twelve-month warranty period.
5. All transportation and shipping charges.
6. Removing or altering the seal on the rear of the front part of
the safe under any circumstances will automatically void
the warranty.
© 2012 BARSKA®
1721 Wright Ave| La Verne, CA 91750 | USA
(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
2/12
BC195
Care and Maintenance
- If necessary use a damp cloth to clean the safe. DO NOT use
chemicals or cleaning agents
- Keep liquids away from the control panel. Spills on the control
panel will cause damage and possibly electric shock
- Properly secure the safe to prevent it from falling and causing
damage or injury
- DO NOT lose tamper resistant cover
- DO NOT over stuff the contents of the safe or you can
damage the motor mechanism or the contents
- DO NOT disassemble the product. For all repairs and
maintenance, contact authorized service centers or distributor
-
DO NOT place emergency keys inside of safe
J. Mounting
The safe may be mounted to a wall or through the floor. When
mounting to a wall, be sure of the load bearing so as to hold the
weight of the safe and the contents. Failure to do so could result
in the safe falling and damaging property and or people.
Suggested 12mm socket wrench tool and drill bits
Mounting Through The Bottom Of The Safe
1. Check the floor for what type it is (wood, tile and or concrete)
2. Get the appropriate anchors for the type of floor you have
3. Check location on the floor for concealed wires or pipes
4. Mark the floor to drill your anchor
5. Drill the appropriate size hole for the anchors you have
6. Mount the safe and make sure it is securely mounted
DO NOT mount safe without anchoring to the wall behind
the safe!
Mounting Through The Back Of The Safe
1. Check the wall or cabinet for structural soundness
2. For safety, have someone help you to hold the safe during
mounting
3. Check location for concealed wires or pipes
4. Mark the surface to drill holes for the anchors you will
be using
5. Drill the appropriate size holes for the anchors you are using
6. While having someone hold the unit, anchor the safe to
the wall
7. Test the strength of the mounted safe so it will not fall off the
wall or cabinet
DO NOT mount safe without anchoring to the wall behind
the safe!
