RDG603A23
–
Issue 20
Page 29 of 84
13. Engine Oil
WARNING:
BURN HAZARD!
WAIT UNTIL THE ENGINE COOLS BEFORE YOU DRAIN THE
ENGINE OIL. HOT ENGINE OIL MAY SPLASH AND BURN YOU.
•
All Shire engines are supplied fully run in.
•
Check oil levels in engine and gearbox before starting
•
The Shire 90 uses John Deere oil. See
Section 8
–
Service Schedule
for the
specification of the oil
14. Fuel
WARNING:
DIESEL FUEL IS FLAMMABLE AND EXPLOSIVE UNDER CERTAIN CONDITIONS.
WARNING:
DIESEL FUEL IS HARMFUL TO SKIN. MAKE SURE THE RELEVANT PERSONAL
PROTECTION EQUIPMENT IS WORN.
•
Ensure the main fuel tank is clear of dirt and water.
•
A separate water trap must be fitted to all engine installations. The engines are
supplied with an additional fuel pre-filter water trap as standard.
•
Connect fuel feed return hoses from engine to main supply and return lines to main
fuel tank, ensuring they are connected the correct way around.
•
Connect the inlet to the primary fuel filter inlet hose.
•
The engine hoses are supplied with 10mm (
3/8”
) OD metal hosetails and should be
securely fitted to the main supply and return pipes with compression fittings.
•
The engine hoses should have sufficient slack to absorb engine movement without
placing strain on the hoses and be securely clipped to prevent accidental damage and
chafing.
•
Initially fill the fuel system by loosening the bleed screw on the top of the primary fuel
