Barrus SHIRE 15 YM DB BARNES, Оригинальная инструкция

Страница: 15 / 19

RDG603A62
– Issue 2
Page 15 of 19
regular intervals. Note: Engine must be stopped to carry out this check).
•
Standard Control Panel
Figure 2: Standard Control Panel
3. Stopping Procedure
•
Move speed control lever to idle position.
•
Press the stop button
•
Turn key to off position.
4. Diesel Fuel Additive
The use of diesel fuel additive is strongly recommended on Shire engines. The quality of the
fuel available when cruising is often unknown. Also the fuel may have been in storage for
long periods of time. The use of additives will ensure that your engine fuel injection system
is in top condition which should result in many years of smooth reliable operation, without the
cost and inconvenience of expensive breakdowns due to poor quality fuel. It has also been
found that improvements in fuel consumption and start ability are an added benefit of using
this product. Diesel fuel additive is available from your Shire dealer in a handy 500ml
container, Part Number RDG80210219.
5. Engine Overheat Protection
To prevent engine damage, if the coolant temperature is too high then the engine will
automatically sense this and stop. Before investigating the cause of the problem let the
engine cool down. Once the problem has been rectified the engine can be restarte
Description
1 Tachometer Gauge
2 Hour Meter
3 Water Temperature Warning Light
4 Oil Pressure Warning Light
5 Alternator Charge Warning Light
6 Glow Plug Light
7 Heat Start Button
8 Key Flap and Ignition Switch
9 Stop Button