Barrus EZ-S06R, Руководство оператора

Страница: 39 / 97

RDG603A74 - Issue 4 Page 39 of 97
6. Tilting the Electric Outboard
To put the electric outboard in the raised position:
Ensure the motor is stopped and the battery disconnected.
•
Unlock the lower tilt lock mechanism by pulling the handle down and r
otating 90˚ to sit
as shown in Figure 32 .
Figure 32: Tilt Lock Lever
•
Lift and tilt the electric outboard up. Lift and tilt the outboard until the lift latch engages
and this will hold the leg in the raised position. ( Figure 34 )
To adjust the trim angle:
•
When the electric outboard is in the raised position, remove the R clip from the trim
pin.
Figure 33: Trim R Clip and Pin
(Unlocked) (Locked)