BARRON TRACE LITE FXA 350W Series, Инструкция по установке

Страница: 2 / 3

Yoke Mount
1. Mount fixture’s bracket to surface using expansion bolts or appropriate hardware (provided by others) (Figure s 1 & 2 ) .
Note: Allow for proper line cord slack for adjusting the angle.
2. Make electrical connections, refer to Wiring section (Figure 3) .
3. Set the desired fixture angle by loosening the positioning bolt and rotating the Yoke to the desired angle, then re-
tighten to secure (Figure 2) .
FXA 35 0W Series
Installation Instructions
200701 67 R EV 1 - 07/20
2
800-533-3948 www.barronltg.com
M10 Screw
Yoke Mount
Pole
/ Arm by others
2.28
"
6.14
"
0.62 "
7.95
"
15.75
"
Ø0.78
"
Figure 1 (Mounting Dimensions)
Figure 2