Barron Games Playair Quadair, Руководство пользователя

Страница: 19 / 20

12
18
How to fix the goal gate.
If the gate is clicking, it is because the solenoid is not
catching in the Solenoid Capture hole. During shipment
and instillation the solenoid can bend inward toward gate.
This results in the solenoid not catching in the capture
hole. To remedy pull the solenoid and slightly bend the
bracket down, away from the gate until the solenoid is
completely in the capture area and stops the goal gate
from “clicking”. The clicking noise is the sensor switch not
getting the information to “lock” by the solenoid.
Instructions:
1) Remove gate from table
2) Bend bracket down
3) Ensure proper alignment between solenoid and
solenoid capture hole.
4) Test unit.
Solenoid Moving
Goal Gate
Solenoid Capture