J123325-JL
Page 5 of 6
03/12/18
(1) 8mm x 24mm Flat Washer
(1) 8mm Nylon Lock Nut
Front
Clamp the Clamping
Bracket to the bottom
of the rain gutter
Attach Clamping Bracket to
Mounting Bracket:
(1) 8mm x 24mm Flat Washer
(1) 8mm Nylon Lock Nut
Attach Foam
Strip between the
Mounting Bracket
and the top of the
vehicle
Attach the Rubber trim to the
Clamping Bracket
Fig 10
(2) 8mm x25mm Combo Bolts
(Fig 11) Secure Mounting Bracket to Clamping
Bracket with two 8mm Combo Bolts
(2) 8mm x25mm Combo Bolts
(1) 8mm x 24mm Flat Washer
(1) 8mm Nylon Lock Nut
(2) 8mm x25mm Combo Bolts
Front
(2) 8mm x 25mm Hex Bolts
(4) 8mm x 24mm Flat Washers
(2) 8mm Nylon Lock Nuts
NOTE: On models with 4 doors, position the Clamping
Bracket approximately 14” from the start of the rain
gutter on the rear door. For models with 2 doors,
position the Clamping Bracket approximately 50-1/2”
from the end of the installed Rear Window Bracket.
14”
14”
(Fig 12) Position the Mounting Bracket inside
the rain gutter and wrap the Clamping Bracket
to the inside of the door (4 door- Passenger
side Front Bracket assembly pictured)
(Fig 13) Position the Mounting Bracket inside
the rain gutter and wrap the Clamping
Bracket to the inside of the door (4 door-
Driver side Front Bracket assembly pictured)
