12
3.
Connect positive and negative
battery leads to the appropriate
terminals and slide the battery
into position. Ensure the battery
is sitting beneath the L-shaped
brackets on the left-hand side of
the case and the battery cable is
loosely under the brackets.
4.
Ensure the battery rod is in posi-
tion and put the battery hold-
down bracket in place. NOTE:
the battery rod has two available
positions on the left of the case
by moving the retaining saddle
up or down. Select the position
that allows the battery rod to be
angled downwards slightly i.e so
the lowest point of the rod is on
the left.
5.
Insert the two supplied setscrews
into the appropriate holes in the
battery hold-down bracket so
that they pass through the cor-
responding slots in the vertical
panel.
2.
Remove the seven cap-head
Allen screws from the top of
the display panel with an no.
2 (metric) Allen key.