1320/1420/1620 Owner’s-Operator’s Manual
2/16/16
Page 18 of 20
WORK SITE ASSESSMENT
Examine the work area for any conditions or obstructions that may inhibit tilling or create a safety hazard for the
operator or others. Use the information in this manual combined with good judgment to identify any hazards to
avoid.
In addition to calling to DETERMINE LOCATION OF UNDERGROUND UTILITIES (see previous section for
details), the operator and/or job foreman should visually inspect the work site. Look for electrical drop boxes,
notices of underground placements, manhole covers, recent trenching or tilling activity, any evidence of possible
underground placements, banks, drop-offs, rocks, wire, uneven terrain, any existing holes and toxic ground
conditions.
Only operate tiller outdoors and avoid breathing engine exhaust and fumes.
WARNING
: Engine exhaust contains carbon monoxide gas that is toxic. Breathing it can cause
unconsciousness and death.
Do not operate tiller near any source of flammable dust or vapors.
WARNING
: Sparks from the engine exhaust can cause an explosion or fire in a flammable or explosive
atmosphere. Fuel fumes can catch fire or explode.
Allow adequate side and overhead clearances between tiller and any objects such as buildings, fences, and
trees.
Adequate lighting is required, daylight or artificial, for safe operation of the tiller.
Keep others away. If the job site is near a road or pedestrian path, warn and divert both motorized traffic
and pedestrians. As appropriate, erect barriers, use traffic flag personnel, signs, cones, and lighting devices
to insure safety.
WARNING
: Someone could step into the tilled area by accident. Walking near the edge of the tilled area
could cause loss of balance and possibly cause someone to fall into the rotating tines. Contact with the
rotating tines while in operation will cause serious injury or even death.
MACHINE FUNCTION CHECK: If the operator releases the CLUTCH LEVER, the wheel drive and rotating
tines should stop. This is intended for your safety and must be maintained in good functional condition. Contact
your dealer or the factory if anything on the tiller does not function properly
.
*Always follow manufacturer instructions*
*AAA Rent-All 225-291-1356*
