912 Operator’s Manual
12/4/14
Page
2
of 1 2
DAILY LUBRICATION REQUIREMENTS
Be sure to grease all lubrication points
as outlined
below.
•
The grease zerk on chain shaft housing should be greased after every 4 to 8 hours of use.
•
The grease zerk in the front wheel should be greased after every 8 hours of use.
•
Grease zerks on cylinder rod end and boom pivot should be greased daily.
•
Grease zerks on each side of the boom cylinder and on front wheel hub should be
greased once a week.
•
Grease zerks on the wheel hubs and hub lock screws should be greased and
freewheeled once a week or so, depending upon free wheel use.
