912 Owner’s Manual
8/31/21
Page
7
of
16
WHEEL DRIVE VALVE CABLE ADJUSTMENT
The clutch cable and lever must have some free play. The cable will stretch and
occasionally needs adjustment.
1. Rotate the actuator arm clockwise, by hand, to take up any free play. Measure the
distance from the pin of the actuator arm to the end of the cable housing.
2. Pull the clutch lever all the way up until it touches the handle bar grip. With the lever
pulled up, again measure the distance from the pin of the lever to the cable housing.
Calculate the difference.
3. Adjust the cable for 7/16" to 1/2" movement of the actuator arm at the pin. Do not
include any lever free play in the measurements.
To see a video on how to do this adjustment, enter the following address in your browser
URL window:
https://www.youtube.com/watch?v=utUdozpYBcg&feature=youtu.be
