Barracuda Control Server, Руководство администратора

Страница: 15 / 49

Using the Barracuda Control Server 15
make sure you have the latest firmware installed on the product. If not, download and install it
before proceeding.
5.
Enable Expert Mode on the product you wish to connect to by adding the following content to
the end of the URL in your browser address bar:
&expert=1
6.
From the
ADVANCED > Cloud Control
page on the product, select Yes for Connect to
Barracuda Cloud Control .
7.
Enter the username and password of the account admin for your Barracuda Control Server.
8.
In the Barracuda Cloud Control field, enter the IP address or hostname of the Barracuda
Control Server.
9.
Paste the Barracuda Control Server validation token you copied in
step 3
into the associated
field.
10.
Click Save Changes . Note that your product can connect with only one Barracuda Control
Server at a time.
11.
In the Barracuda Control Server web interface, refresh your browser page and you should see, in
the Products pane on the left side of the page, a (1) immediately to the right of the newly
connected Barracuda Networks product type. By default, statistics are presented for that
product. Click on the product link to configure using the web interface for that device.
Using the Task Manager to Monitor System Tasks
The
ADVANCED > Task Manager
page provides a list of tasks that are in the process of being
performed, and displays any errors encountered when performing these tasks. Some of the tasks that
the Barracuda Control Server tracks include:
• Configuration restoration
• Connections
• Removal of invalid users
If a task takes a long time to complete, you can click the Cancel link next to the task name and then
run the task at a later time when the system is less busy. The Task Errors section lists an error until
you manually remove it from the list; errors are not automatically phased out over time.
Troubleshooting
Testing Network Connectivity
The Barracuda Control Server web interface provides a suite of tools to help diagnose potential
network problems, including ping, telnet, dig/NS-lookup, TCP dump, and traceroute. See the online
help on the
Network Connectivity Tests section of the
ADVANCED > Troubleshooting
page for
details about using these tools. You must be logged in as the Barracuda Control Server administrator
to access the troubleshooting tools.