Barpa Crux 4 Series, Инструкция по эксплуатации, Страница: 3 / 12

IM_20 | date: 12/23
approved by: Ana Barbosa
3/12
1
3
2
4
Remove side panel from frame, put them separate for
the preparation of the frame assembly. Open the front door by key, pull the door latch downward,
refer to the picture, remove the front door from front
frame, put them separate for the preparation of the
frame assembly.
Fix 19” mounting rails to the first holes of top & bottom
of side frames by 4sets of M5 screws. Install side frames to the grooves of back frame by 4pcs
of M6*12 screws (6pcs if more than 18U) as shown by the
arrow in the picture, note 19” mounting rails are in the
front side.
EN
Instruction Manual
Series Crux 4