Page 6
LED
Color
Status
Descriptions
PWR(Power LED)
Green
On
Lights to indicate that the VDSL2 bridge had
power
Green
Off
The device is not ready or has malfunctioned.
LNK(Ethernet LED)
Green
On
The device has good Ethernet connection.
Green
Blinking The device is sending or receiving data.
Green
Off
The LAN not connected.
LNK RT(VDSL Link)
Green
On
RT mode.
Green
Blinking Handshaking/Transmit & Received data
Green
Off
The device not ready.
FUL 100(LAN Link)
Green
On
The device is link on 100M Full duplex and ready.
Green
Blinking The device is sending or receiving data.
Green
Off
The device is link on 10M Full duplex and ready.
3.
The following table describes the DIP Swit
ches’ setting.
Pin 1
Pin 2
Pin 3
Pin 4
Side
Channel
Rate Limit
SNR
Off
OT
30a
Symmetric
9dB
On
RT
17a
Asymmetric
6dB
Pin 1: OT, RT switch
OT:
LAN Extender acts as Central Office (CO) side.
RT:
LAN Extender acts as Customer Premise Equipment (CPE) side.
Pin 2: Impulse noise protection
30a: High Speed Mode.
Provides communication protection for up to 250ms
impulse
noise with latency less than 6 ms.
17a: Long Reach Mode.
Direct data transmission with latency less than 1 ms.
Pin 3: Band Plan
