Barox L Series, Руководство по эксплуатации, Страница: 6 / 69

barox Kommunikation 6
•
Other Useful Features
Jumbo Frames up to 9,600Bytes are supported at 1 Gbits and also 100 Mbits.
Port security by means of MAC address restriction and IP identifica tion
Readability and provision of certificates, resp.
Extra high backplane performance for smooth video transmission at full port utilisation
Ports using PoE can be detected at the push of a button (front panel) .
2.2 DMS (Device Management System)
The switch is equipped with an integrated network monitoring and control system that uses
a very simple method to provide the user with an excellent overview of the whole network.
The network Topology View provides a quick overview of all the switches an d terminal equipment
in the network, e.g. IP cameras and servers, together with information on their respective IP
addresses, device types and device descriptions. Plans showing the floor layout and the local
environment can be stored as background images. These allow the user to quickly access
specific network equipment
− even without special knowledge of the IP structure.
Finalised plans can then be exported and included in the documentation.
3 C o m m i s s i oni ng
The switches can be configured using a web browser. To do this, a PC/laptop can be connected
to any desired RJ45 port. Care should be taken to ensure that the IP address of the PC/laptop
belongs to the same network segment as the switch. For example: 192.168.1.111 .
Alternatively, the switches can also be configured via a CLI (console port). In this document, the
switch is configured using a web browser.
3.1 Factory Default and Login
The switches are supplied with the following factory default settings:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
User: admin
Password: admin
A connection can be made to the switch by entering the IP address of the switch (192.168.1.1)
straight into a web browser. To log in, the user simply enters the user name and password listed
above.
Once the login process has been successfully completed, the “System Information” page is
automatically displayed showing the most important information on the switch.