Baroness SP05, Руководство по обслуживанию

Страница: 7 / 142

Fuel is highly flammable so make sure that
you take the following precautions when
handling it.
Store fuel in containers specifically
designed for this purpose.
Make sure that the fuel pipe is not
damaged.
Refuel before operating the machine. Do
not remove the fuel tank cap when the
engine is running or when the engine is
hot.
Refuel outdoors only and do not smoke
while refueling.
Do not add too much fuel.
If fuel is spilled, do not start the engine.
Move the machine away from the area
where the fuel was spilled and then start
the engine. Dispose of the spilled fuel
properly.
Close the fuel tank and fuel container cap
securely.
Warm the engine on cold days. Set the
parking brake while warming the engine.
When operating or transporting the
machine
This machine is not authorized for operation
as a special motor vehicle. Do not operate it
on public roads.
Make sure that the operator sits in the
operator’s seat when operating the machine.
Do not carry passengers.
Do not start the engine in a closed space for
there is a danger of carbon monoxide
poisoning.
Before starting the engine, disengage all
equipment, place the gearshift in neutral,
and set the parking brake.
Operate the machine during the day or in an
area with sufficient lighting. Do not operate
the machine at night or in poor visibility.
Remember that there is no such thing as a
safe slope. Operating on slopes requires
particular care.
To avoid overturning:
Do not stop or start suddenly on any
slope.
Reduce speed when operating on a slope
and when making sharp turns.
Always stay alert for bumps and other
hidden obstacles.
17.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
18.
1.
2.
3.
4.
5.
6.
[1]
[2]
[3]
Never drive the machine across a slope
unless the machine is designed to do so.
Never drive the machine on a slope with
an angle of gradient that is greater than
that specified or in a place where there is
a danger of the machine slipping.
If instructed to do so in the Owner’s
Manual, use a counterbalance or wheel
balance.
Always keep a lookout for hidden hollows or
obstacles.
Do not take your eyes off the road ahead. Do
not operate the machine with no hands.
Reduce speed when turning or crossing
roads or sidewalks, and pay close attention
to your surroundings when proceeding.
Use care when approaching blind corners,
shrubs, trees, or other objects that may
obscure your vision.
When using attachments, never direct the
discharge at bystanders or allow anyone
near the machine while it is operating.
Do not crawl under the machine while it is in
operation.
Before backing up, look down and behind
you to check that the path is clear and that
you can back up safely. Have someone
guide you if it is difficult to check the area
behind you.
Do not operate the machine with damaged
protection guards or with guards not installed
properly. Be sure to install the covers.
Never remove the interlock systems. Make
sure that they are properly adjusted before
operation.
Do not change the engine governor setting
or operate the engine at too high a speed.
Doing so could result in an accident causing
injury or death, or a malfunction.
Do not touch the exhaust system during
operation or just after the engine has been
turned off. Due to its high temperature, doing
so could cause burns.
If an unusual vibration occurs, stop the
engine immediately, inspect the machine
and try to identify the cause. Make repairs if
necessary.
Wear earmuffs as the noise level
experienced in the operator’s position during
operation may exceed the specified level.
[4]
[5]
[6]
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Saf
ety
Safety
Page 1-3 Safety instruction