Baroness LM551B, Руководство по эксплуатации для владельца

Страница: 163 / 172

Firmly tighten the filter cartridge by hand so
that the packing contacts the mounting
surface.
Then, tighten it an additional 1/2 turn.
1
xv94lv-002
Change of Hydraulic Suction Filter_002
1 Cartridge filter
Supply hydraulic oil until it reaches the
specified level.
"Supply of Hydraulic Oil" (Page 4-7)
Start the engine, and then after the
hydraulic oil has warmed up, stop the
engine.
Check underneath the machine for
hydraulic oil leakage.
Install the filter protection plate.
Change of Air Cleaner
A contaminated air cleaner element may cause
malfunction of the engine.
To maximize the life of the engine, replace the
air cleaner element at the appropriate times.
The timing for replacing the air cleaner
element is described below.
Replace the air cleaner element in
accordance with the Maintenance
Schedule.
If it is significantly contaminated, replace
it, even if the hours of operation do not
exceed the specified time.
Replace the air cleaner element by following
the same steps as for cleaning the air
cleaner.
"Cleaning of Air Cleaner" (Page 4-9)
5.
6.
7.
8.
9.
1.
[1]
[2]
2.
Change of Engine Oil
Caution
Be careful with hot oil, which could cause
burns if it contacts your skin.
Important
When changing the engine oil, be sure to
drain it into a container and discard it in
accordance with local laws and regulations.
Important
Be sure to use engine oil that is classified as
JASO DH-2 or API Service Grade CJ-4, with
an SAE Viscosity that is appropriate for the
operating environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
Change the engine oil more frequently if it is
contaminated and especially if you use the
machine in dusty areas or operate the engine
at high loads or in high temperatures.
Follow the steps below to remove the old
engine oil.
Start and run the engine to warm up the
engine oil.
With the machine on a level surface, stop
the engine.
Remove the drain plug, and then drain the
old engine oil into a container.
1
gui678-029
Change of Engine Oil_001
1 Drain plug
Re-place the drain plug.
1.
[1]
[2]
[3]
[4]
Maintenance
LM551B
Maintenance
Page 5-49
Maintenance Work