Baroness LM18G Series, Руководство пользователя, Страница: 5 / 62

3
Preparation 2.
�
�
�
�
Evaluate the terrain to determine what accessories and attachments are needed to
properly and safely perform the job. Only use accessories and attachments approved by
the manufacturer.
While operating, always wear substantial footwear, long trousers, hard hat, safety
glasses, and ear protection. Long hair, loose clothing, or jewelry may get tangled in
moving parts. Do not operate the equipment when barefoot or wearing open sandals.
Inspect the area where the equipment is to be used and remove all objects such as rocks,
toys and wire which can be thrown by the machine.
Warning—Fuel is highly flammable. Take the following precautions:
�
�
�
Check that operator’s presence controls, safety switches and shields are attached and
functioning properly. Do not operate unless they are functioning properly.
If the brake operation is faulty or the parking brake lever has noticeable play, be sure to
adjust or repair them before operating the machine.
Replace faulty mufflers.
�
�
�
�
�
Store fuel in containers specifically designed for this purpose.
Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel
while the engine is running or when the engine is hot.
Refuel outdoors only and do not smoke while refueling.
If fuel is spilled, do not attempt to start the engine but move the machine away from
the area of spillage and avoid creating any source of ignition until petrol vapours have
dissipated;
Replace all fuel tanks and container caps securely.
Operation 3.
�
�
�
�
�
�
�
�
�
Do note operate the engine in a confined space where dangerous carbon monoxide fumes
can collect.
Only operate in good light, keeping away from holes and hidden hazards.
Before attempting to start the engine, disengage all blade attachments, shift into neutral,
and engage the parking brake.
Start the engine or switch on the motor carefully according to instructions and with feet
well away from the blade(s).
Avoid operating the equipment in wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Look behind and down before backing up to be sure of a clear path.
Remember there is no such thing as a safe slope. Travel on grass slopes requires
particular care. To guard against overturning.
�
�
�
Never operate the machine with damaged guards, shields, or without safety protective
devices in place.Be sure all interlocks are attached, adjusted properly, and functioning
properly.
Do not change the engine governor settings or overspeed the engine. Operating the
engine at excessive speed may increase the hazard of personal injury.
Do the following before leaving the operator’s position:
�
�
�
�
Do not mow excessively steep slopes.
Do not stop or start suddenly when going up or downhill.
Engage clutch slowly, always keep machine in gear, especially when traveling
downhill;
Machine speeds should be kept low on slopes and during turns.
�
�
�
�
stop on level ground;
disengage the cutting unit and traction drive;
set the parking brake;
stop the engine.