- 10 -
For transportation of the machine, give attention to the width of the loading space.
Inspect the machine according to "13. Maintenance schedule."
Supply the specified quantity.
Don't use old oil.
Lubrication the friction surfaces of each part.
6. Inspection before use
6-1. Lubrication to each part
Approx. 28 litters of hydraulic oil is in the hydraulic tank. Place the machine
horizontally and check that the level of the hydraulic oil is at the center of the oil
gauge.
Change the hydraulic oil one year or 500 hours later, whichever comes earlier.
Change the filter when the hydraulic oil is changed.
When the hydraulic oil is emulsified or its transparency is lost even slightly,
change it instantly.
Supply the hydraulic oil, Shell Tellus ST46 or TX46(ISO VG46) or its equivalent.
6-2. Inspection of hydraulic oil
Refer to the diesel engine operation manual for the method of handling the
engine.
6-3. Hydraulic oil change
- -
8
C A U T I O N
C A U T I O N
1
2
3
1
2
3
4
5.Specifications
HMC1560
HMC1720
1,717mm
1,910mm
30 7.2cm(51P)
Forward: 0-6.5 km/h
Backward: 0-4.5 km/h
Belt tension type
3-30 cm
(Mowing width Operation speed 0.7)
35
35 7.2cm(51P)
120 blades
140 blades
154cm
170cm
70 are/h (6.5 km/h)
77 are/h (6.5 km/h)
16.7kPa
1,480kg
1,545kg
14.7kPa
1,520kg
1,585kg
Dimensions
Total length
Total width
Total height
Engine
Rubber crawler
Speed change
(Hydraulic variable speed)
Hammer knife
Knife clutch
Mowing height
Mowing width
Efficiency
Max. operating inclination
Ground pressure
Dry weight
Curb weight
3,000mm
1,350mm
Mitsubishi Diesel S4L2-E331KM 1.758L (1,758 cm
3
)
Max. output: 27.0 kW/3,000 rpm (36.7 PS/3,000 rpm)
Fuel tank: 33 L (dm
3
)
The idling speed of the engine is approx. 1,500 rpm. Set the idling speed to avoid
sympathetic vibration with the machine. The engine revolution may reach 3,200 rpm
under no-load condition.
CAUTION
