Baroness GM2810, Руководство по обслуживанию

Страница: 124 / 185

Rotary Knife
Removal of Rotary Knife
Mower unit #1
Danger Danger
The rotary knife is an edged tool.
Handle them carefully, since they could cut
your hands or legs.
Caution
When touching edged tools, wear gloves,
since they could cut your hands.
Start the engine, and then raise the mower
units.
Stop the engine, and then remove the key.
Pull up the mower unit.
1
to41g1-002
Mower unit #1_001
1 Mower unit
Remove the cotter pin and hardened
roundhead pin inserted at a, and then
insert them at b.
1
2
a
b
to41g1-003
Mower unit #1_002
1 Cotter pin
2 Hardened roundhead pin
￭
1.
2.
3.
4.
Follow the steps below to remove the
rotary knife.
Use the square pipe from the included
tools to secure the rotary knife so that it
does not turn.
Remove the two bolts, spring washers
and washers used to install the rotary
knife.
Remove the knife guide.
Remove the rotary knife.
1
6
2
3
4
5
to41g1-007
Mower unit #1_003
1 Square pipe
2 Rotary knife
3 Bolt
4 Spring washer
5 Washer
6 Knife guide
5.
[1]
[2]
[3]
[4]
GM2810
Operating Machine and Mower Units
Page 7-6
Removal and installation of each section