Adjusting the height of cut range
Height of cut Adjustment Bracket
Height of cut adjustment bracket
retaining bolts. This photograph
shows the bracket set in the default
position with the bolts located ‘top
right and middle left’.
Loosen all three height adjustment
shim retaining nuts.
It is important
to loosen all three nuts at once and
not to try and adjust one bracket at
a time
. Trying to adjust one bracket
at a time will make the task very
difficult as this will have the effect of
trying to twist the deck.
Remove all six of the shims from
above and below the bracket.
Again it is important to do this to
all three positions at once and not
to try doing one adjuster at a time.
