34
34
When Required
Emptying Non-Recirculating
Collection Bottle
Empty the collection bottle when the water in the bottle
reaches the FULL mark.
Slide the bottle away from the cooling tank to remove.
Pour the contents down the drain.
Cleaning Printer Recess (MC10)
The MC10 printer may be removed to allow cleaning of the
recessed area. See the “Printer” section for removal proce-
dure. Use a mild disinfectant to clean the recess.
O
PERATOR
M
AINTENANCE
Figure 27
Emptying Non-Recirculating Collection Bottle
Collection
Bottle
Empty Contents
Down The Drain
Note
The fill port is the bottom hole in the
back of the chamber. The top hole is
for the temperature probe and
should not be obstructed.
Hot Surface
Burn Hazard: Do not empty the col-
lection bottle when the sterilizer is in
operation.
Note
It is important to periodically check
the water in the collection bottle.
Failure to empty the bottle when full
will result in water overflowing onto
surrounding surfaces.
Содержание Harvey Hydroclave MC8
