Barnes thermoplay TH-M6, Руководство пользователя

Страница: 51 / 71

51
32 Temperature memory limit for SSR Alarm 0 °C 0 1000 30
33 WAIT function hysteresis 1 °C 0 100.0 2.0
34 EasyMode, automatic reply at start questions 0 0 2 0:Off 0
35 Time for calculation of average power 0 sec 0 3600 60
36 BOOST max. duration 0 sec 0 3600 30
38 Threshold value A/D alarm NTC sensor
(heatsink overheating – only with board cnt-02)
0 A/D 0 1023
>1023 = Off
70
39 Offset A/D to alarm from NTC sensor->STOP 0 A/D 0 1023 10
40 Offset to 70° coupling temperature for overheat alarm 0 °C 0 1000 0
41 Offset to 75°C pcb for overheat alarm 0 °C 0 1000 0
42 Offset to 5°C for overheat -> STOP 0 °C 0 1000 0
43 Disable supply phases test at the start 0 0: Test enabled 1:Test disabled 0
44 Minimum acceptable voltage value 0 Volt 0=off, 1 500 14
45 Maximum acceptable voltage value 0 Volt 0=off, 1 500 28
46 Max voltage reduction after power ON 0 Volt 0=off, 1 500 7
47 Power ON time during wiring test 0 sec 0 60 2
48 Working time counter (lower part) 0 Tick
15min
Read-Only Read-Only
49 Total worked days (this parameter is referred to the
selected board)
0 days Read-Only Read-Only
56 Flag for mould test running 0 0 1 0