background image

START-UP REPORT

ENGINE DRIVEN

This report is designed to insure the customer that customer service and a quality product are the number one priority
with Crane Pumps & Systems, Inc. Please answer the following questions completely and as accurately as possible.
Mail this form to:

In U.S.A. Send To:

In Canada Send To:

CRANE PUMPS & SYSTEMS, INC.

CRANE PUMPS & SYSTEMS, INC.

ATTN: WARRANTY SERVICE GROUP

ATTN: SERVICE MANAGER

420 THIRD ST. / P.O. BOX 603

83 WEST DRIVE, BRAMPTON

PIQUA, OHIO 45356-0603  U.S.A.

ONTARIO, CANADA L6T 2J6

REPORTS THAT ARE NOT RETURNED CAN DELAY OR VOID WARRANTY.

Pump Owner’s Name:
Address:
Person in Charge of Pump:
Phone:
Purchased from (Crane Pumps & Systems Representative/Distributor)

Pumps Model & Brand:
Part Number:
Trailer type:  Skid Mounted

Contractor Trailer

Highway Trailer

Other

Condition of Equipment:

Good

Fair

Poor

Condition of Trailer:

Good

Fair

Poor

Condition of Pump:

Good

Fair

Poor

Condition of Engine:

Good

Fair

Poor

Startup Checklist 

BEFORE

 Starting Engine:

Check/Add Engine Oil
Check/Add Fuel
Add liquid to pump case
Check automatic diaphragm type oiler reservoir oil level (Double Seals Only).
Check grease cup grease level (Single Seals Only).

Liquid Being Pumped:

Equipment difficulties during startup.

Manuals:
Has operator received pump instructions and parts manual?
Has operator been briefed on warranty?
Address of local Crane Pumps & Systems Representative/Distributor.

(over)

Содержание 2CDG3





















Отзывы: