SAFETY INFORMATION
THESE CAUTION MARKS ARE LOCATED THROUGHOUT THIS GUIDE.
= Lightning flash within a triangle, is to alert the user of the presence of dangerous
voltage that may create a risk of electric shock. Do not open cover. No user serviceable
parts within.
= The exclamation point within a triangle is to alert the user to:
• “CAUTION” important information regarding the care and use of this equipment
• “WARNING” possibility of personal injury
= Power off
= Power on
IMPORTANT SAFEGUARDS! PLEASE READ THIS FIRST
Follow these basic safety precautions when this using electrical appliance to reduce the risk
of fire, electric shock and/or personal injury.
WARNING: Keep all loose items including hair, clothing and towels clear of machine
brushes at all times – entanglement could cause bodily harm to the machine operator.
WARNING:
“A” Model Upright machine motors are water resistant but NOT SUBMERSIBLE.
Do not use “A” Model Upright machines in sinks or tanks where there is a risk of falling
over or submersing the motor.
WARNING: Observe the water level labels on machines. Do not overfill tanks. Never fully
submerse any Glass Washer motor.
WARNING
: Special SS Model cord requires original replacement part available only from
Bar Maid Corporation. Contact Bar Maid Corporation for replacement.
WARNING:
Motors may get hot with extended use. Turn off when not in use.
WARNING: Plug unit only into a GROUNDED outlet that matches the voltage/cycle as
listed on the motor. Outlet must be equipped with a UL/CSA approved ground-fault circuit
interrupter (G.F.C.I.).
WARNING: Keep electrical cord clear of brushes and water.
WARNING
: Switches and switch boxes (for SS Model) must
NOT contact water. ATTACH
BOX TO A DRY LOCATION with screws provided.
CAUTION: DO NOT operate machine out of water.
WARNING: DO NOT use any machine if the power cord or motor housing is cracked or
damaged.
CAUTION: Ensure brushes are securely in place before turning machine on.
CAUTION: Use machine only for the purpose it was intended.
WARNING: Disconnect from the power source before servicing.
WARNING: Do not use if any parts are cracked, broken or leaking oil.
