9
Dynalco SST7200 & SST7400 Software
The Dynalco host software provides serial communication between a PC or laptop and the
SST7200 & SST7400. The software is compatible with Windows XP, Vista and Windows 7
operating systems. The SST7200 & SST7400 must be connected via provided Dynalco
P/N
270A-105574
serial communication cable.
The Dynalco host software is available as a free download from our website:
downloads
Following installation, a shortcut will be installed on your PC desktop. This application
software allows access to various screens for configuration of input signal sensitivity,
proportional output and relay logic / setpoints. Once the configuration parameters are set,
they can be programmed into the SST7200 & SST7400 and a spec file can be saved to the
PC. This saved spec file can then be loaded into another SST7200 & SST7400 if desired.
Additionally, there is an import function allowing uploading of the spec file from an SST7200
& SST7400 to the PC
Configuration consists of the steps described in the following pages:
