Barko 830B, Руководство по обслуживанию

Страница: 25 / 218

13-5
®
PREVENTIVE MAINTENANCE
(PM)
NEW-MACHINE INSTRUCTIONS
Preventive maintenance (PM) is a matter of common sense. If you keep any piece of mechanical
equipment clean and properly lubricated, and promptly replace any worn or damaged parts, you will
prevent deterioration and promote long life and safe, productive service.
The suggested schedule on the following page(s) is(are) designed to be a reminder of what should be
done. For detailed instructions on each item, consult the Table of Contents for where each is located in this
manual.
When operating under severe job conditions, such as a dusty job site, in extreme heat or cold, long
operating days, or extremely heavy loads, the recommended maintenance intervals in the schedule may
need to be shortened.
Safety glasses or goggles are always needed for eye protection from electric
arcs, from shorts or welding, battery acid, compressed springs, fluids under
pressure, and flying debris or loose material when engines are running or
tools are used. Use eye protection approved for type of welding. Failure to obey
warnings can cause death, severe injury or property damage.
Instructions are necessary before doing service on loader. See warnings and
instructions both at the beginning and throughout this manual. After doing service or
making repairs or adjustments always check function of loader.
Ÿ
Refer to component sections thoughout this manual for specific service requirements.
Ÿ
Change all filter elements.
attachment, turntable bearing, lower assembly, tires, loader mounting bolts, etc.)
Ÿ
Resume the normal maintenance intervals after this. See the Service Schedule for more info.
A new machine needs a special maintenance procedure at the first 100 hours of operation.
Ÿ
Do a complete inspection of the loader, fix any problems, replace any damaged parts.
-Turntable Bearing Mounting Bolts
-Mounting Bolts/Nuts on major machine components (gearboxes, motors, pumps, booms,
AT THE FIRST 100 HOURS OF NEW MACHINE OPERATION ...
Ÿ
Check torque (re-torque if necessary):
WARNING
!
This manual does not contain specific
service or maintenance information for
attachments or diesel engines if applicable.
Please refer to separate attachment or engine
manuals supplied with your BARKO loader.
NOTICE
05/28/2019
Updated
SERVICE