OPERATION (ELECTRIC)
REMEMBER TO KEEP HANDS AND FEET FROM UNDER
THE FOOT PLATE WHEN USING POWER JACK.
When VIP Jack reaches the end of it's travel (either
raising or lowering), the internal clutch activates.
Dolly wheels are not recommended.
Warning
AVOID THE RISK OF INJURY OR DEATH TO YOURSELF AND OTHERS:
USE THE JACK FOR LIFTING THE TRAVEL TRAILER ONLY.
.
NEVER GET BENEATH THE TRAILER WHEN IT IS SUPPORTED BY THE JACK.
.
SUPPORT THE VEHICLE WITH THE APPROPRIATE MEANS.
.
OPERATION (MANUALLY):
WARNING!!!
Do not use toggle switch with
crank handle in place.
Breaking this rule will cause
serious injury or death.
REMEMBER TO KEEP HANDS AND FEET OUT FROM UNDER
THE FOOT PLATE WHEN USING THE POWER JACK!!
DOLLY WHEELS ARE NOT RECOMMENDED.
BREAKING THESE RULES WILL CAUSE SERIOUS INJURY OR
DEATH.
WARNING
19989
Don't risk serious injury or
death in a shearing or
squeezing accident. Keep
body, hands, and feet away.
VIP 3500 POWER JACK OWNER'S INSTRUCTIONS
P/Ns 30828, 30900, 31558 (WHITE) and P/Ns 32454, 32455 (BLACK)
If an electrical failure should occur,
the emergency handle may be in-
serted into the jack post and the
jack can be raised or lowered.
(Access can be obtained by twist-
ing cap off. NOTE: You do not
have to remove or loosen
screws on level to remove the
level assembly.) If the power-
head is removed, crank can
still be used to raise and
lower jack.
.
.
The JACK will raise and
lower by this
toggle switch--
NOT the travel trailer.
The "night-light" is
controlled by this
toggle switch
UP
DOWN
BARKE
R M
ANUF
ACTURING
P/N X
XXXX
Performanc
e
SERIES
3000
High
SCHEMATIC WIRING DIAGRAM
P/N 736-2300
STRAP ATTACHMENT:
1. Press strap (1) onto the stud (2) at
the bottom of the cap.
2. Press the retaining ring (3) on stud
(2) snug it down against the strap (1).
3. Repeat this process (4) on the stud
found on the inside of the cover.
THIS WILL SECURE YOUR CAP.
2
3
1
4
COVER,
INSIDE
BOTTOM OF CAP
BARKER MFG. BATTLE CREE
K
HIGH POWER
SERIES
3000
30000LBS CAPACITY
