BARKER AND STONEHOUSE BSH-RCD-004B Скачать руководство пользователя страница 5

5

ASSEMBLY INSTRUCTIONS

GAS FIREPIT SAFETY ADVICE - READ BEFORE YOU START!

• 

ONLY 

5kg Patio Gas Bottle

 can be used in conjunction with this firepit. 

Using any other size will invalidate your warranty and will damage your 
product.

• Perform a visual inspection of all fixings ensuring they are all securely tightened 

before using the system for the first time.

• When using your gas firepit table, operate on solid ground only.

• 

The gas firepit table can only be used outdoors, in a well-ventilated area.

• 

The gas system must be checked and serviced yearly, by a qualified gas 

safety engineer.

• 

NEVER

 add any fuel to the burner tray.

• 1 x AAA battery must be inserted into the ignition ensuring the negative side is 

inserted first.

• Ensure the black wire from the system is connected to the igniter.

• Make sure the gas supply is switched off before changing the battery in the 

ignition.

• Turn off the gas supply after each use.

• Only 

ONE

 gas bottle can be stored under the table when in use.

• If you smell gas, turn off the gas supply immediately, open the lid and ventilate the 

area.

• The windguard is purely that and will not prevent the surrounding area from 

heating up. It prevents the flame from being blown across the table only and it will 

get hot.

• The fire glass is heat resistant and is for decoration to cover the pan and firepit 

system. The ring burner can be covered in crushed glass. However, the pilot cover 

cannot be covered or the flame will fail to ignite.

• The system should be kept clean at all times and can be cleaned with a damp 

cloth.

• To release the gas bottle you press the button under the regulator. This will only 

work if the gas is switched off.

• For further gas safety information refer to the instructions within the gas system.

Содержание BSH-RCD-004B

























Отзывы: