User Manual
Page 3
Bark Solution declares that BSW300A Model Anti-Bark Collar complies
with part 15 of the FCC rules
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
Bark Solution is a trademark of Zimston Corp. – U.S.A
• Before using the collar, we strongly advise you to have your dog checked
by a vet to ensure he is fit to wear a collar.
• Regularly check your dog’s neck as repeated rubbing of the
contact points against the skin may cause irritation. If this happens, re-
move the collar until all signs of skin irritation have disappeared.
• Do not leave the collar on your dog for more than 8 hours a day.
The owner’s involvement during the first time use of the product is a key
factor to obtaining the best results.
Do not leave your dog unattended with the collar on until he is used to
wearing it and you are satisfied that it is working correctly. You should
ensure that the settings are adjusted correctly for your dog barking detec-
tion sensitivity, operating mode.
Closely watch your pet during the first days’ use.
Operate the device as per instructions.
As soon as your dog stops barking, congratulate him (but not excessively)
by stroking him, verbally flattering him, or giving him dry food so as to
encourage him to behave himself.
Remember that barking can indicate some behavioral problems. The bark
control collar will allow you to resolve problems caused by
excessive barking.
FCC
COMPLIANCE
ADVICE TO
FIRST TIME
USERS
TRADEMARK
WARNING
