Compass
BARIGO
–
Makes
the
Difference
23
1. Press the
S3
button for two seconds until you hear a double
signal tone. The indicator
A5
will automatically move to the
"zero" position (= N/360°). If the indicator is not at the zero posi-
tion, continue to the next step.
2. Press
S2
to set the indicator
A5
to the zero position. To move
quicker, hold the
S2
button.
3. Place the BARIGO PENTA on a level surface and rotate the
BARIGO PENTA 360° twice within 30 seconds.
4. To exit the calibration mode, press the
S3
button. The BARIGO
PENTA automatically leaves the calibration mode after a minute
and changes to the compass mode.
