Dellonda Limited, Sole UK Distributor of Baridi
Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284
757575 [email protected] www.dellonda.co.uk
5
Troubleshooting
Environment Protection, Waste Electrical and Waste
Electronic Equipment Regulations (WEEE)
Recycle unwanted packaging materials. When this product is no longer required, or has
reached the end of its useful life, please dispose of in an environmentally friendly way.
Drain any fluids (if applicable) into approved containers, in accordance with local waste
regulations. It is our policy to continually improve products and we reserve the right to alter
data, specifications and parts without prior notice. No liability is accepted for incorrect use
of this product. Guarantee is 12 months from purchase date, proof of which is required for
any claim.
Symptom
Solution
Unit does not operate.
Not plugged in.
Fuse/circuit breaker failure.
Turns on and off frequently.
Poor cooling.
Room temperature higher than normal.
Door opened too often.
Door not properly closed.
Temperature control incorrectly set.
Door gasket not sealing.
Not enough space around unit.
Vibrations
Check to assure unit is level.
Noisy unit
Contraction/expansion of panels.
Unit not level.
Check fan operation.
Check heat pump.
Door will not close properly
Unit not level.
Gasket distorted.
Internals out of position.
• Use the symbol to lower the temperature
setting in either the top or bottom
compartments.
• When you have set the desired temperatures
leave the keypad for 20 seconds and it will
lock and retain those settings.
• The light and temperature setting button will
work as normal.
• To unlock the keypad press the symbol
again.
• Temperature in the upper section can range
from lowest 5°C/41°F to maximum 18°C/64°F.
• Temperature in the lower section can range
from lowest 5°C/41°F to maximum 18°C/64°F.
• Upper and lower sections operate
independently of each other.
• MAINTENANCE
• Remove the power plug from the supply when
performing cleaning or maintenance.
• DO NOT
use abrasive or chemical cleaning
materials on any surface of the unit.
• Wipe interior and exterior surfaces with a
damp cloth and dry thoroughly with a clean
dry cloth.
• For more soiled surfaces use a neutral
detergent, wipe down with a clean damp cloth
and dry thoroughly with a clean dry cloth.
