7
HOW TO USE THE COOKER
BEFORE FIRST USE
•
Note: The product will produce a light smell when it is used for the first time and will disappear after a few minutes. This is due to the
manufacturing process and does not affect to it’s operation.
•
1. Take the product out of the box and remove all packaging materials.
•
2. Make sure the product is in good condition. If any sign of visible damage is observed, contact Customer Service.
•
3. Place the appliance on a clean, stable and flat surface. Do not place it close to the edge, inside built wardrobes or mount on brackets.
•
4. Clean the appliance before using it for the first time: wipe the body of the appliance with a soft, dry cloth and wash the blades with warm water
and washing up liquid. Rinse with clear water and dry carefully with a soft cloth.
• 5. Connect it to a power supply and press the power switch to turn it on. The machine will beep and the display will turn on.
TIPS FOR USE
• After use, the jar may be hot. Do not touch the surface of stainless steel jar.
•
The total amount of ingredients and liquid must not exceed the MAX limit line (2L for cold preparation and 1.5L for hot preparation). Overfilling
can result in overflow, and there may be a risk of burns.
• If you are unsure of the quantities use the measuring cup included.
• You can stir your ingredients on the jar before putting the lid on, this prevents the ingredients from sticking to the bottom of the jar.
•
Remove your hot preparation from the jar when the cycle is finished because the bowl is still hot and may burn your preparation.
• If the product does not work after power-up, check if the jar and / or lid are in the correct position. If not, remove the jar and / or lid and replace
them properly.
MANUAL PROGRAMS
•
The device is equipped with 5 manual program buttons : Time, Speed, Tem
perature, Power and WiFi. This allows you to adjust the programs
yourself depending on what and how you wish to cook.
ON/OFF SWITCH
• On/off switch is on the back of the appliance.
START/PAUSE KNOB AND RESET FUNCTION FIG. 1.5
•
1. Use the knob to adjust all settings: time, temperature etc. Turn it clockwise to increase the value and anticlockwise to decrease it.
• 2. Once the desired setting or program has been selected, press the knob to activate it and the appliance will start operating.
•
3. During the setting process or machine working process, long-press the knob around 3 seconds, appliance will clear all set program and return
to standby mode.
•
4. If no operation on appliance during standby mode for 10 minutes, the appliance will automatically turn off.
• 5. While appliance is cooking, chopping, kneading etc. You can press the start/pause knob. The cooking process will go into pause mode and the
display will show “PAUSE” . Then you can open the lid, remove the jar or add missing ingredients.
•
Once food has been added, place every element back in its correct position and press the start/pause knob again to resume operation. After 10
minutes in “PAUSE” status without any operation, the appliance will automatically turn off.
TIMER
• The display shows
for hr:min:sec.
•
1. Press the timer button once, the minute digits will flash. After minutes setting, press it again it switches to seconds setting, the seconds digits
will flash. Press it again it will switch to hours setting, hours digits will flash. Turn the knob left or right to adjust the desired minutes/seconds/
hours.
• 2. During operation, you can press the timer button to adjust the cooking time and the appliance will start counting down automatically.
•
3. If the timer has not been set, the product
will operate with the preset times:
•
-Heating (without blending): max. 12 hours
•
-Blending (speed 1-4): max. 1 hour
•
-Blending (speed 5-10): max. 2 minutes
SPEED
•
1. During standby mode or operation, press
this button to enter speed-setting mode.
The speed icon will flash on the display.
• 2. Turn the knob left to decrease speed
and right to increase it, from level 1 to 10.
•
3. Press the speed button during the
blending or heating process to adjust it.
Speed options will vary depending on the
cooking temperature.
•
4. If the selected speed is 5-10, the timer
will only be set up to 5 minutes. For the
rest of the speed options, 1 hour.
Example of preparation for each speed :
