manualshive.com logo in svg

Bardiani Valvole BBZS1, Инструкция по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Bardiani Valvole BBZS1 Скачать руководство пользователя страница 15

BARDIANI VALVOLE reserves the right to modify without notice its products, including products already ordered.

(GB-IST-BBZS1-0312) 15/16

14. Technical data

Valve technical specifications:

Max. working pressure:                                                  10 bar (145 psi)

Min. working pressure:                                                   Full vacuum

Max. product temperature:                                             140° C (284° F)

Min. product temperature:                                              -10° C (14°F)

Material in contact with the product:                               AISI 316L (1.4404)

Seals in contact with the product (FDA homologation): EPDM, FKM, HNBR, P.T.F.E.

                                                                                       (other seals available upon request).

Finish on surfaces in contact with the product:    Ra 0.8 µm

 (other types of surface finish on request).

Steam barrier specifications:

Connectors:                                                                    1/8” (BSP)

Max. steam temperature                                               130°C (266°F)

Seal / gasket material:                                                   FKM

PED Directive 97/23/EEC, with special reference to Annex III, Module A regarding internal production 

control as Conformity Assessment Procedure in force valve sizes DN10--25 are not included in accordance 

with Article 3 paragraph 1.3:

Valves intended for gases, liquifi ed gases, gases dissolved under pressure, vapours and those liquids whose 

vapour pressure at the maximum allowable temperature is greater than 0,5 bar above normal atmospheric pressure 

(1013 mbar) within the following limits

- For fl uids in Group 1 with a DN greater than 25 

Содержание BBZS1

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды