manualshive.com logo in svg

Bardiani Valvole BBWO1, Инструкция по эксплуатации и обслуживанию

Поделиться
Скачать
Bardiani Valvole BBWO1 Скачать руководство пользователя страница 4

 

4

EN-IST-BBZO-0420

INTRODUCTION 

This “Instruction, Use and Maintenance Manual” has been prepared to provide guidance and 
recommendations to assist qualified skilled technicians in the understanding, running and 
maintenance orf the Products supplied.

It forms an integral part of the Products supplied and must be read prior to any installation, 
operation and/or maintenance of all types of valves provided.

This manual must be saved for future reference and be kept readily available at the unit.

With regards to the use of valves compliant with EU Directive 2014/34/UE (ATEX), consultation 

of a speciic manual is mandatory.

The essential characteristics of all types of valves described herein being consistent, the 
Manufacturer reserves the right to alter and or complement and or update at any time and with 
no obligation to notify so in writing, the data and or information relevant to the use of the valves 
described in this "Instruction, Use and Maintenance Manual".

A constantly updated version of this "Instruction, Use and Maintenance Manual" is available 
at the Manufacturer's website www.bardianivalvole.it.

Under no circumstance shall the Manufacturer be held liable for consequences resulting 
from failure and or improper use of the instructions contained in this Manual and relating to 
the installation, operating, maintenance and storage of the products.

All rights reserved.

Full or part reproduction, transfer and or recording of any part of this "Instruction, Use and 
Maintenance Manual" by all means, whether it be electronic, on hard copy, mechanical or any 
other means or recording or reuse is strictly prohibited without the prior written consent of the 
Manufacturer and for any use other than that of the Buyer.

(Translation of the Original Instructions in the italian Language)

Содержание BBWO1


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды