Manual 2100-559
Page
4 of 6
START-UP NOTE:
Upon initial power-up, indoor fan will cycle on for approx. 30 seconds, and then shut off.
System will be in the “OFF” position. Default time and date will be 12:00 a.m., Jan. 1, 2000.
- In order for the system to operate in either heating or cooling mode(s), the controller must be
initially programmed with specific HVAC model number, specific System Enabling, and
appropriate temperature Setpoints.
Basic Operation: Home, Main Menu, and Override Screens
Navigate the menus and change settings by pressing a combination of
various arrow buttons and the Enter button. Push the:
•
Enter
button to select and/or exit value editing
•
Up
or
Down
button to move among entries
•
Right
or
Left
button to move among value fields
•
Left
button to return to the home screen
Quick-Start Programming: Model Selection, System Enabling, and Temperature Setpoints
Model Selection –
to select specific HVAC unit model from the
Home Screen
, press:
1.
Right
button to access the
Main Menu
Screen
2.
Down
button through entries to highlight
Advanced
3.
Enter
button to select
Advanced
and enter
Advanced
Screen
4.
Enter
button again to select/enter
Applications Screen
5. Controller will ask for
Admin Level Password
Factory Default
Admin Level Password
:
BARD
6.
Down
button to highlight
Additional Setup
7.
Enter
button to select/enter
Additional Setup
Screen
8.
Enter
button again to select/enter
Unit Model
Screen
9.
Enter
button again to highlight current model
10.
Up/Down
buttons to choose from available models:
-
W3*V
Model – Wall Mount 3-Ton Variable Capacity System (Factory Default)
-
W5/6*V
Models – Wall Mount 4/5-Ton Variable Capacity Systems
-
P60/72*V
Models – Packaged 5/6-Ton Variable Capacity Systems
11.
Enter
button to select/save appropriate model
12.
Left
button (5x) to navigate back to Home Page
System Enabling –
to access system types from the
Home Screen
, press:
1.
Right
button to access the
Main Menu
Screen
2.
Down
button through entries to highlight
System
3.
Enter
button to select
System
and enter
System Screen
4.
Enter
button again to select
System Enable
5.
Up/Down
buttons to choose between six (6) options.
