Barco XLM H25, Руководство пользователя

Страница: 56 / 111

6. Adjustment Mode
The Edit file adaptation menu will be displayed (automatic positioned on the actual file). (menu 6-9)
3. Select the file which must be edited (mostly the active file).
4. Press ENTER .
The file name will be displayed in the upper right corner. (menu 6-10)
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-8
EDIT FILE
Filename Src resolution
video525.s01 1 675x240i
video525.c01 1 675x240i
video525.c02 1 675x240i
-------------------------------
Active file : Video525.c50
Select with
↑
or
↓
<ENTER> to accept
<EXIT> to return
Menu 6-9
EDIT FILE xga_60.s30
HORIZONTAL
TOTAL
1344 PIXELS
ACTIVE 1024 PIXELS
HOR START 160 PIXELS
PERIOD 20678 nsec
VERTICAL (FIELD)
TOTAL
806 LINES
ACTIVE 768 LINES
VERT START 9 LINES
INTERLACED [ON]
OPTIONS
←
,
→
<ENTER> to adjust
<EXIT> to return
Menu 6-10
6.3.4.2 Changing the settings
Different methods
The 3 different methods to change a setting will be described hereafter. These methods are:
•
with the numeric keys on the remote control.
• with the arrow keys selecting the changing digit.
• with the arrow keys counting up or down.
How to change a setting with the numeric keys?
1. Push the cursor key ↑ or ↓ to highlight an item.
The color of the selected item will change.
2. Press ENTER to activate the digits.
3. Enter directly with the numeric keys on the RCU or local keypad the new value.
How to change a setting with the cursor keys?
1. Push the cursor key ↑ or ↓ to highlight an item.
The color of the selected item will change.
2. Press ENTER to activate the digits.
3. Push the cursor key ← or → to select the changing digit.
4. Push the cursor key ↑ or ↓ to scroll to the desired digit.
5. When finished, press ENTER to confirm.
How to change a setting with the cursor keys and counting up or down?
1. Push the cursor key ↑ or ↓ to highlight an item.
The color of the selected item will change.
2. Press ENTER to activate.
3. Counting up or down by pushing the cursor key ← or → .
6.3.4.3 Correct value
What is already available during start up?
During the installation of a file with LOAD, the horizontal period, the total number of vertical lines are automatically measured and
filled out in the menu table. These values will be available when starting up the EDIT procedure of an active file.
C
AUTION
:
Do not adjust these settings on an active file, they are used to identify the input source file.
52 R5976690 XLM H25 03/09/2004