51
R5914477 /00
XDM
4.4 Connecting a UPS with the projector
electronics
WARNING:
Only use UPS units which are suitable for the XDM series projector. See chapter
Installation requirements
, for more information about the requirements of the UPS.
CAUTION:
The electrical connection with the UPS INLET socket of the projector must be done with
a certified AC power supply cord (minimum 1.50 mm² or 14 AWG and minimum 300V)
The projector is configured by default for use without UPS.
Required tools
•
Torx screwdriver T20
•
Flat screwdriver
•
Open-end wrench 24 mm
•
Nut driver 10 mm
•
Torque wrench with 10 mm hexagon socket
Required parts
Certified AC power supply cord 1.5 mm², 14 AWG, min 300 V
How to connect a UPS unit with the projector electronics?
1.
Make sure the net input cover has been removed. For more info, see
“
Accessing the power connections
”
,
.
2.
Loosen the top nuts on the six UPS configuration pins. Use a 10 mm nut driver.
Image 4
–
8
3.
Replace the links as illustrated.
Содержание XDM
