Barco XDL Series, Руководство по установке, Страница: 71 / 156

R5906150 /02 XDL 71
1
2
C
l
i
c
k
Image 6-9
Note: For frequent installation and removal of the lens it is recommended to install the lens while the
lock handle is in “ open ” position (to the right) and put the lock handle in “ locked ” position once the lens
is inserted. Then check if the lens is properly installed by trying to pull the lens out of the Lens Holder.
This alternative procedure results in less wear of the Lens Holder and reduces the risk of accidentally
moving the projector while pushing in the lens.
7. Check if the lens is really secured by trying to pull the lens out of the Lens Holder.
CAUTION: Never transport the projector with a Lens mounted in the Lens Holder. Always remove
the Lens before transporting the projector. Neglecting this can damage the Lens Holder and Prism.
6.5 Lens removal
How to remove a lens from the Lens Holder?
1. Support the lens with one hand while you unlock the lens holder by sliding the lock handle (reference 1
Image 6-10) towards the
“ unlocked ” position as illustrated.
2. Gently pull the lens out of the lens holder, maintaining its coaxial direction.
1
Image 6-10
It's recommended to place the Lens caps of the original Lens packaging, back on both sides of the
removed Lens to protect the optics of the Lens.
It's recommended to place the plastic cover of the original projector packaging, back into the lens
opening to prevent intrusion of dust. This plastic cover prevents that dust is entering the projector.
Lenses & Lens selection