Barco XDL-4K75, Руководство пользователя

Страница: 86 / 117

9. GUI – System Settings
The GSM pin code input menu is displayed. The current con fi gured PIN code is indicated next to Pin input fi eld. If the code is
still the same, it is not necessary to enter the PIN code again. If it is a PIN code, continue with next step.
Image 9-6
Enter PIN code
2. Enter the 4 digits of the pin code and select APPLY and click OK .
9.3 IR control
Overview
• Broadcast address
• Projector address
• IR sensors
9.3.1 Broadcast address
About broadcast address
Broadcast address is a common address that can be set on the projector. That can be “0” or “1”.
Any command coming from a remote control programmed with that common address will be executed.
How to the broadcast address
1. In the main menu, select System Settings → Communication → IR Control .
Image 9-7
Communication menu, IR control
The IR control menu is displayed.
Image 9-8
IR control menu
2. To change the broadcast address select the radio button of your choice.
The following choices are possible:
-
Generic IR (address 0)
- Barco broadcast IR (address 1)
3. Select APPLY and click OK to apply the changes.
82 R5906151 XDL 17/04/2018