Barco Wodan, Руководство пользователя

Страница: 79 / 94

7. Advanced operations
7.11 IR control
Overview
• Broadcast address
• Projector address
• IR sensors
7.11.1 Broadcast address
About broadcast address
Broadcast address is a common address that can be set on the projector. That can be “0” or “1”.
Any command coming from a remote control programmed with that common address will be executed.
How to the broadcast address
1. In the main menu, select System Settings → Communication → IR Control .
Image 7-66
Communication menu, IR control
The IR control menu is displayed.
Image 7-67
IR control menu
2. To change the broadcast address select the radio button of your choice.
The following choices are possible:
-
Generic IR (address 0)
- Barco broadcast IR (address 1)
3. Select APPLY and click OK to apply the changes.
7.11.2 Projector address
About individual projector address
Before a projector, and only this projector, can be controlled via a remote control, an individual address must be entered in the
projector.
This individual projector address can then be used to control the projector via remote control.
Next to an individual projector address, each projector has also a broadcast address for group control.
How to change
1. In the main menu, select System Settings → Communication → IR Control .
R5906102 WODAN 10/04/2018 75