Barco ULTRA REALITY 7000, Руководство пользователя

Страница: 35 / 99

5. Source Selection
5. SOURCE SELECTION
Overview
• Source selection
• Composite Video
• S-Video selection
5.1 Source selection
Selecting a source
The Source selection menu allows to select one of the different sources. Another method to select an input source is via the remote
control using the numeric keys or by using the local keypad.
How to select a source ?
1. Press MENU to activate the Toolbar
2. Press ↓ to Pull down the Source Selection menu
3. Use ↑ or ↓ to select one of the different sources ( Press → to Pull down if the item has a submenu) (image 5-1)
4. Press ENTER to confirm your choice
On the screen appears now the selected source.
Image 5-1
A Barco logo on the menu indicates the presence of a signal.
The 3 first sources (Data on BNC’s 1, Component Video & RG(s)B) refer to the first 5-cable input.
When to select “Data on BNC’s 1”
Select Data on BNC’s 1 when a data signal is connected to the BNC’s labeled “1”
When to select “Component video” ?
Select Component video when a signal of the type (PR/Y/PB) is connected on the BNC’s labeled “1”.
When to select RG
s
B Video ?
Select RG
s
B Video when an RGB video signal with Sync on green or sync on H is presented on the BNC’s labeled “1”
This signal is routed to the video circuit and is projected in a Video Window.
When to select “Data on RGB’s 2”
Select Data on BNC’s 2 when a data signal is connected to the BNC’s labeled “2”
R5976455 BARCO ULTRA REALITY 7000 30062003 31