Barco ULC-30A, Руководство по обслуживанию

Страница: 17 / 102

3. Preventive maintenance
3. PREVENTIVE MAINTENANCE
This chapter is intended for trained personnel or expert operators.
Overview
• Monthly maintenance
• Yearly maintenance
• 3 yearly maintenance
• 30000 hours maintenance
3.1 Monthly maintenance
Overview
Description
Comments
Required parts
Check/clean/replace air fi lter Check the air fi lter for dust and grease. Clean if necessary. If
not possible due to damage, replace with a new one.
Spare Chiller fi lter
3.2 Yearly maintenance
Overview
Description Comments Required parts
Check air extraction system Check booth air extraction system for adequate extraction
Check for InfoT’s Check if any Info-T have been released that need an
intervention on the ULC-30A.
Check runtime Check runtime to verify if any runtime-driven interventions are
required.
Check for leaks Check for liquid leaks in the ULC-30A
Check insulation Check status of insulation
3.3 3 yearly maintenance
Overview
Description Comments Required parts
Flush cooling liquid Replace the cooling liquid of the system (± 30l)
ULC-30A draining and re fi ll tool needed. Includes re fi ll tool,
Service SW, cable to connect laptop to chiller.
Cooling liquid 5l
Tooling
3.4 30000 hours maintenance
Overview
Description Comments Required parts
Replace Secondary cooling unit Replace together with primary pump DCM-60A secondary
cooling unit
R5906015 ULC-30A 01/02/2018 13