Barco UDX Series, Руководство по установке

Страница: 24 / 100

R5906113 /09 UDX 24
2.1 Preparation process
Prepare for installation
1. Ensure that you understand all safety topics described in the chapter “ Safety information ” , page 7.
2. Check if all installation requirements are fulfilled such as:
• the environmental conditions of the installation area,
• the electrical facilities,
• cooling requirements,
• the capabilities of the supporting structure (table/ceiling)
• etc ... for more info see chapter “ Installation requirements ” , page 30.
3. Unpack the projector or pull out the projector from its flight case. See chapter “ Unpacking the projector ” , page
32 or see chapter “ UDX flight case ” , page 68.
4. In case of a first install perform an initial inspection of the projector. See chapter “ Initial inspection ” , page 34.
5. Define the installation position of the projector. For detailed info and possibilities see chapters:
• “ Projector orientations ” , page 35.
• “ Projector positioning ” , page 37.
• “ Projector shift and tilt range ” , page 38.
6. Select the lens that will best fit for the application. See chapter “ Lens selection ” , page 39, and “ Available
lenses ” , page 40.
Installation process