![background image](http://html1.mh-extra.com/html/barco/udx-r9008600/udx-r9008600_quick-start-manual_3872908003.webp)
- 3 -
Switch off
1. Press the Power on/off button for three seconds.
2. Wait until the after-cooling cycle is finished (approximately 30 sec.)
3. Turn the mains switch to off (’0’).
4. Unplug the power cord from the projector.
3
2
1
30 s
3 s
4
Local Keypad
1
Menu Navigation.
2
Menu Selection.
3
Open Menu.
4
Menu Back.
5
Power On/Off.
6
OSD On/Off.
7
Input Selection.
8
Shutter Open/Close.
9
Test Patterns.
10
Lens Menu.
11
Touch Panel.
1
2
3
4
5
6
10
11
9
8
7
• Remove the lens before transporting the projector.
• First switch the projector to Standby mode and wait until After Cooling is
finished to switch off the main power.
• Ensure the projector is operating with clean filters.
• Do not block the ventilation in and outlets.
• External laser light can cause severe damage to the DMD. This damage is
not covered by warranty.
Precautions