Barco UDM Series, Руководство по установке

Страница: 44 / 104

R5911438 /08 UDM 44
4.1 Pulse RCU, battery installation
Where to find the batteries for the remote control ?
The batteries are not placed in the remote control unit to avoid control operation in its package, resulting in a
shorter battery life time. At delivery the batteries can be found in a separated bag attached to the remote
control unit. Before using your remote control, install the batteries first.
How to install
1. Push the battery cover tab with the fingernail a little backwards (1) and pull, at the same time, the cover
upwards (2).
1
2
Image 4–1
2. Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery
compartment.
Tip: Use alkaline batteries for optimum range and life time.
+
-
-
+
Image 4–2
3. Insert (1) both lower tabs of the battery cover in the gaps at the bottom of the remote control, and press (2)
the cover until it clicks in place.
+
-
-
+
1
2
Image 4–3
When replacing batteries, the broadcast address of the RCU will be reset to its default value '0'.
Installation procedures