Barco TransForm A series, Руководство пользователя

Страница: 65 / 198

3. Getting started
Barco – TransForm A - X Terminal – DOC-3265-2 – user's manual – Revision 09 – September-2006
_____________________________________________________
3-47
Network configuration
Select Config : Networking : Client Tasks : Host name and IP network devices .
Figure 3-55
Up to four network cards are automatically detected during the system installation. This means the settings for
net device and kernel module are correct if the cards have been present during installation. If a card is inserted
afterwards also these settings have to be adopted. The drivers (Setting:
Kernel module ) for the different net-
work cards are:
driver network card redundancy
eepro100 Ethernetcard 100 Mbps, PCI no
e100 Ethernetcard 100 Mbps, PCI possible
e1000 Ethernetcard 1000 Mbps, PCI possible
e1000 onboard LAN adapter (AGS-3328-2 and higher) no
bcm4400 onboard LAN adapter (AGS-3328-1 and lower) no
bcm5700 onboard LAN adapter (AGS-3389-0 and higher) no