Barco Solaris LC40 R9004120, Руководство пользователя

Страница: 63 / 83

10. Advanced Settings
Switching between manual and automatic
1. Select
Advanced Settings
.
2. Press ENTER to activate.
The Advanced Settings menu will be displayed. (menu 10-14)
3. Select
Noise Reduction
.
The noise reduction menu will be displayed. (menu 10-15)
4. Select Manually or Automatic and press ENTER to toggle between [Manually] or [Automatic].
When Automatic is selected, the Adjust option is grayed out.
Advanced Settings
Gamma
Color Temperature
Input Balance
Noise Reduction
Display Settings
Installation
Service
Back
Menu 10-14
Noise Reduction
Adjust
[Manually]
Back
Menu 10-15
Adjusting the noise reduction manually.
1. Check first if the noise reduction is set to manually.
If yes, go to step 2
If no, Select first automatic and press
ENTER to toggle to manually.
2. Select
Adjust
.
A slider bar will be displayed with the actual noise level reduction.
3. Use ↑ or ↓ to adjust the noise level to the desired value.
The higher the value, the higher the noise reduction.
10.6 Display Settings
Overview
• Rotate
• Backlight
10.6.1 Rotate
Rotate is only available when the optional rotator module is inserted in the Solaris LC40.
About rotate
With the rotate function it is possible to go from a normal landscape image to a portrait image.
R5976672 SOLARIS LC40 01122003 59